Stainable Foil Specifications


Product Description

  • Meet the complex requirements of decorating plastic parts, CPS’s innovation of stainable foil allows you to create surface finish using water based or oil based color stains
  • Low maintenance, durable and meets the specific demands of workability of any type of stains

Range of Applications

Doors, Windows, Furniture Industry, Plastic Decorating, and PVC wall covering industry

Plastic Parts

ABS, PS, rigid or flex PVC, acrylic, rigid vinyl, and coated wood

Available Colors

Available width: 25 & 50 inches Please contact CPS Resources, Inc. for a catalog

Foil Characteristics

  • Works well with both water based and oil based stains
  • Quick drying with air ventilation
  • Excellent absorption of water based stains
  • Can be applied to vertical or horizontal flat surfaces, curves, edges and contoured profiles
  • Suitable for interior application
  • Available with selection of woodgrain patterns
  • Excellent humidity resistance

Working stamping tools / stamping condition

  • Silicone Roll-on hot stamping
    • 180°C – 220°C depending on roll-on speed.
    • Roller hardness of 70 – 80 durometer
    • Pressure: 70 – 80 PSI

Stain preparation

After stamping, remove any dust of linton surface from the stamped area. Apply stains using soft clean cloth or thick brush. Wipe in the direction of the woodgrain, while blending light and dark areas to obtain uniform color. For the water-based stains, allow 10 to 15 minutes of drying time before applying the 2nd coat. For the oil-based stains, allow 1 hour prior to applying the 2nd coat. Dry time may need to be extended due to high humidity, low temperature area or inadequate air ventilation.


  • Keep in cool, dark dry place
  • Kept standing up right
  • Keep 25°C – 35°C
  • Maximum relative humidity below 75%