CPS Resources Inc

Vertical Stamping Equipment

Contact us to learn about our Custom Models

Model DPB 500

More Information

This 1/2 ton machine has a stamping area of 4″ x 4″ and is ideal for hot stamping small parts and short runs. This versatile machine can decorate business cards, name tags, novelty items, specialty cards and can also be used to tip raised surfaces.

| Back to Top |

DPB 1000 Series

CPS_DPB1000SeriesThe DPB 1000 Series is used for stamping products anywhere from flat to partially cylindrical parts. It is available in one, two or three ten capacity. Custom models can be configured to accommodate your specific production needs.

The DPB 1000 Series can apply hot stamp foil or multi-colored heat transfers in a single operation. The DPB 1000 Series offers a diversified range of hot stamp and heat transfer possibilities.

The DPB 1000 Series can decorate delicate and intricate products with exact precision. Detailed quality is easy to achieve with the DPB 1000 Series as shown on the cosmetic cases at left.

Standard Features
  • Side frames constructed of ground steel with welded steel support frame casters and leveling feet
  • Head assembly guided by 4 hardened steel shafts and 8 ball bushings
  • Ground steel heated head
  • Ground steel dovetail plate with adjustable top
  • Four corner die leveling adjustment
  • Large work table for mounting tooling
  • 7′ 3/4″ throat depth
  • Adjustable height with easy to adjust crank handle for stamping different size parts
  • With head in the up position there is 18 inches of daylight
  • 6″ bore x 3″ stroke double acting double rod end cylinder with fine tuning die depth stop adjustment and flow controls developing 1 ton of stamping force at 80PSI
  • Air safety shut off valve to keep head from falling off if air pressure is lost
  • Filter, regulator and automatic lubricator
  • Tool Kit
Electrical Controls
  • Proportioning temperature control with digital display
  • K-type thermocouple probe
  • Two hand anti tie-down no repeat press safety control with opti-touch non-contact buttons
  • Dwell, foil start and foil stop timers
  • Power on, heaters on and set-up switch
  • Foil advance and E-stop buttons
Options
  • Multicolored heat transfer indexing system with dual photo eye registration with easy to adjust left to right and front to back transfer placement
  • Tooling fixtures
  • Pneumatic powered slide tables
  • Rotary indexing tables
  • Automatic feed bowls
  • Auto eject systems
  • Fully automated systems
  • XYR tables

DPB-2000 — 8″ bore, 2 tons of force at 80PSI / 16″ of daylight 9-3/4
DPB-2000 — 10″ bore, 3 tons of force at 80PSI / 15″ of daylight 9-3/4

Specifications

DPB-1000

Max Stamping Pressure 1 Ton
Heat Plate Size 180mm x 100mm / 7″ x 4″
Heat Stroke Plate 100mm / 4″
Possible Stamping Size 180mm x 100mm / 7″ x 4″
Max Height of Work piece 0-300mm / 0-12″
Foil Width 0-100mm / 0-4″
Foil Feed Distance 0-180mm / 0-7″
Heaters 220 V x 400 watts, 2 each
Temperature Control 0-399° C / 0-750° F
Voltage Required 220 V, Single Phase, 60 Hz
Machine Weight 550 Kg / 1200 lb.
Machine Size (L x W x H) 1300x1100x2050mm/51″x43″x81″

DPB-2000

Max Stamping Pressure 2 Ton
Heat Plate Size 300mm x 200mm / 12″ x 8″
Heat Stroke Plate 100mm / 4″
Possible Stamping Size 300mm x 200mm / 12″ x 8″
Max Height of Work piece 0-300mm / 0-12″
Foil Width 0-100mm / 0-8″
Foil Feed Distance 0-180mm / 0-12″
Heaters 220 V x 400 watts, 6 each
Temperature Control 0-399° C / 0-750° F
Voltage Required 220 V, Single Phase, 60 Hz
Machine Weight 5600 Kg / 1350 lb.
Machine Size (L x W x H) 1300x1100x2050mm/51″x43″x81″

DPB-3000

Max Stamping Pressure 3 Ton
Heat Plate Size 300mm x 300mm / 12″ x 12″
Heat Stroke Plate 100mm / 4″
Possible Stamping Size 300mm x 300mm / 12″ x 12″
Max Height of Work piece 0-300mm / 0-12″
Foil Width 0-300mm / 0-12″
Foil Feed Distance 0-300mm / 0-12″
Heaters 220 V x 400 watts, 6 each
Temperature Control 0-399° C / 0-750° F
Voltage Required 220 V, Single Phase, 60 Hz
Machine Weight 600 Kg / 1350 lb.
Machine Size (L x W x H) 1300x1100x2050mm/51″x43″x81″

| Back to Top |

P-5000

CPS_P-5000The P-5000 is capable of applying heat transfers, decorative foils amd multi-color heat transfers to large surfaces, ina single operation. 1 to 30 ton machines are available.

 

The P-5000 offers extensive options when it comes to the decoration of your products.  With precision and ease, the P-5000 is able to create delicate and intricate decorations.

STANDARD FEATURES

  • All manufactured parts are chrome plated or painted steel
  • Steel side frames with welded steel support frame, casters and leveling screws
  • 9″ throat depth
  • 16″ x 21″ worktable with pre-drilled hole pattern for mounting tooling
  • Adjustable table for stamping different height parts
  • Ground steel head guided with sturdy steel ram for accurate stamping
  • Ground steel dovetail plate with adjustable stop and a 10″ x 13″ imprint area
  • Four corner die leveling adjustment
  • Filter, regulator and automatic lubricator
  • Proportioning temperature control with digital display
  • Two handed anti tie-down anti repeat press function control with opti-touch non-contact buttons
  • Set-up switch, part counter, power on, heat transfer-foil mode, heaters on all necessary electrical timers, etc
  • Tool Kit

OPTIONS

  • Multicolor heat transfer indexing system with fine tuning placement of transfer
  • 3 sided Plexiglas with a light curtain and sensors on front of machine for operator safety

SPECIFICATIONS

Max Stamping Pressure 5 Ton
Heat Stroke 150mm
1 Cycle Time 5 Seconds
Foil Width Max 150 mm
Heater 220 V x 600 watts, 4 each
Machine Weight 850 Kg
Machine Size (W,L,H) 880x1300x1820mm
Table Size (L,W) 700x420mm
Air Pressure 5-6Kg/cm2
Power Rating 3 Kw
Voltage Required 220 V x Single Phase x 50 Hz

 

OUR PROMISE TO THE CUSTOMER:

  • Detailed parts manual, with complete list of components supplied with each machine
  • Customer inspection is available prior to shipment from our Indian Trail, NC facility
  • We stand behind our quality machines with superior customer service
  • Technical service and in-house training are also available to our customers

| Back to Top |

 

Menu Title